D.I.Y. IPPC Pallet
Step-By-Step D-I-Y (One-Man-Operation)
Pallet Insertion (Top)
![](images/diy_top_01.jpg)
Step: Require 1 piece plywood
![](images/diy_top_02.jpg)
Step: DIY Components
![](images/diy_top_03.jpg)
Step: DIY Pallets 2 Complete Sets
![](images/diy_top_04.jpg)
Step: Require 2 or 3 pieces “L” Shape
![](images/diy_top_05.jpg)
Step: (1/8) 1 Piece Plywood + 2 L Shape Legs
![](images/diy_top_06.jpg)
Step: (2/8) Plywood sits on block
![](images/diy_top_07.jpg)
Step: (3/8) Lower Plywood
![](images/diy_top_08.jpg)
Step: (4/8) Plywood sits properly on “L” Shape Legs
![](images/diy_top_09.jpg)
Step: (5/8) Nailing Process
![](images/diy_top_10.jpg)
Step: (6/8) Nailing Process
![](images/diy_top_11.jpg)
Step: (7/8) Nailing Process Completed
![](images/diy_top_12.jpg)
Step: (8/8) Close Up of Nails
Pallet Insertion (Bottom)
![](images/diy_bottom_01.jpg)
Step: (1/10) Flip Over
![](images/diy_bottom_02.jpg)
Step: (2/10) Place 1st bottom deck
![](images/diy_bottom_03.jpg)
Step: (3/10) Place 2nd bottom deck
![](images/diy_bottom_04.jpg)
Step: (4/10) Place 3rd bottom deck
![](images/diy_bottom_05.jpg)
Step: (5/10) Nailing Process
![](images/diy_bottom_06.jpg)
Step: (6/10) Nailing Process
![](images/diy_bottom_07.jpg)
Step: (7/10) Nailing Process
![](images/diy_bottom_08.jpg)
Step: (8/10) Close Up of Nails
![](images/diy_bottom_09.jpg)
Step: (9/10) Insert Centre Block
![](images/diy_bottom_10.jpg)
Step: (10/10) Completed Nailing of Centre Blocks
![](images/diy_bottom_end.jpg)
Step: (END) Flip over to see complete Pallet
DIY Pallet Insertion Component | ||||||||||||||||||||
|
Note: All IPPC Pallet & IPPC Collapsible Crate are exempted from Heat Treatment and Fumigation